Description:
- The RATH® Staff Station is available in white or ivory Lexan material or Stainless Steel and comes standard on a four gang plate. It is used to audibly and visually annunciate calls. The Staff Station is a Smart Device that communicates back with the Host Controller and is daisy-chain wired on a single cable. The red 1-1/2" push button is used for staff emergency calls and the call placed LED verifies that the call has been placed. The high efficiency LEDs give off a bright and clean light and are contained and divided by a white cover.
|
• 2900-4SS Staff Station Series Part Numbers:
• 2900-4SSIV Ivory
• 2900-4SSWH White
• 2900-4SSSS Stainless Steel
|
Operation:
- When an associated device or zone is activated, the Staff Station can be programmed to light up any of the three RBG or white LEDs. There are four flash settings (steady, slow, medium, fast) and six color options. The sounder will annunciate in high or low volume and can be momentarily muted with the toggle switch. The push button can be programmed to annunciate in any location and in any fashion when it is pressed.
|
Wiring Requirements:
- • Wire: 24 AWG, Cat5 or Cat5e, 8 conductor ONLY
- • Connectors: RJ45 Cat5 or Cat5e ONLY
- • Backbox: Four gang, minimum depth of 3"
|
Technical Specifications:
• Material: High-impact Lexan (white or ivory) or 302 Stainless Steel 20 AWG
• Face Plate Dimensions: 4-1/2" H x 8-3/16" W (four gang)
• SmartLoop™ Power Technology
• Compatible with our SmartCare System
|
Download PDF:
- • Staff Station: 2900-4SS Series Data Sheet
|
