Description:
- The RATH® Duty Station is available in white or ivory Lexan material or Stainless Steel and comes standard on
a three gang plate. It is used to audibly and visually annunciate calls. The Duty Station is a Smart Device that
communicates back with the Host Controller and is daisy-chain wired on a single cable. The high efficiency
LEDs give off a bright and clean light and are contained and divided by a white cover.
|
• 2900-3DS Duty Station Series Part Numbers:
• 2900-3DSIV Ivory
• 2900-3DSWH White
• 2900-3DSSS Stainless Steel
|
Operation:
- When an associated device or zone is activated, the Duty Station can be programmed to light up any of the
three RBG or white LEDs. There are four flash settings (steady, slow, medium, fast) and six color options.
The sounder will annunciate in high or low volume and can be momentarily muted with the toggle switch.
|
Wiring Requirements:
- • Wire: 24 AWG, Cat5 or Cat5e, 8 conductor ONLY
- • Connectors: RJ45 Cat5 or Cat5e ONLY
- • Backbox: Three gang, minimum depth of 3"
|
Technical Specifications:
• Material: High-impact Lexan (white or ivory) or 302 Stainless Steel 20 AWG
• Face Plate Dimensions: 4-1/2" H x 6-3/8" W (three gang)
• SmartLoop™ Power Technology
• Compatible with our SmartCare System
|
Download PDF:
- • Duty Station: 2900-3DS Series Data Sheet
|
